Aphex EXCITER Instruction Manual download pdf (Page 16)

Aphex Systems Ltd. Model 204Page 16

204

instruction Manual

WIRING A TRS INSERT CABLE

Note: Some manufacturers reverse the Tip and Sleeve connections, where the Tip is Return and the Sleeve

is Send. This would mean that IN becomes OUT and OUT becomes IN when referring to the previous

drawing. Be sure to check the owner’s manual of your console.

5.3 EFFECTS LOOP PATCHES

As we stated early on, the Model 204 was primarily designed as an in-line device. However, if you choose to use

it in an effects loop, keep in mind that the signal being received back into the console is not pure effects. The

return is a mix of effects and the original sound. Because of this we recommend that you put the Mix controls

of both the Aural Exciter and the Big Bottom on the maximum setting (fully clockwise) when using the 204 in

an Effects Loop. Because very little Aural Excitement goes a long way, it is possible to get very good results from

this type of set-up.

204

USING A 204 IN AN EFFECTS LOOP

Post Fader AUX Send

AUX Return

Console

Ring

(Return)

Tip

(Send)

Tip

Sleeve

(Ground)

Sleeve

Ring

Tip

Sleeve

Console

Insert Jack

204

OUT

Operation & Applications

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 35 36

No comments

Aphex EXCITER Instruction Manual Page 16