Aphex Xciter Owner's Manual download pdf (Page 6)

Page 6

Exciter

Recommended Starting Place

Recommended Range

Indicator Legend

BIG BOTTOM DRIVE CONTROL & INDICATOR

Turn clockwise until the green LED ﬂashes on bass peaks, then fades

out. This roughly corresponds to the amount of extra bass sustain

you are creating.

However, the LED may not ﬂash or ﬂash brightly even when you

reach the maximum recommended range. Some program material

will interact with this device in unexpected ways, due to frequency

and dynamic content, as well as varying program levels.

BIG BOTTOM FREQUENCY CONTROL

Sets the bass frequency range of the effect. Go clockwise to encompass higher bass

frequencies, and counterclockwise to focus more on the lower bass sounds.

BIG BOTTOM AMOUNT CONTROL

Adjusts the amount of bass enhancement being added into the

original sound. The higher the setting the more dramatic the

effect. Avoid using any more Mix than necessary or excessive peak

levels will arise.

You are encouraged to experiment with the range of settings printed on the face of the unit. When testing the effect

of Big Bottom, turn off the Aural Exciter Mix. Likewise, turn off the Big Bottom AMOUNT when testing the effect

of the Aural Exciter. Doing so allows you to isolate each process and more clearly hear the effect.

Quick Start

1.3 SUGGESTED CONTROL SETTINGS

When you have adjusted each process to your personal satisfaction,

turn up both mixes and A/B the effected and uneffected signal with

the IN/OUT buttons.

1 2 3 4 5 6 7 8 9 10 11 ... 23 24

No comments

Aphex Xciter Owner's Manual Page 6