Aphex 228 Instruction Manual Page 7

  • Download
  • Add to my manuals
  • Print
  • Page
    / 24
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 6
Aphex Systems Ltd. Model 228Page 6
228
instruction Manual
Page 7Aphex Systems Ltd. Model 228
228
8-channel audio interface
2.0 Installation
3.3 AC LINE CONNECTION
Observe the label to the right of the fused receptacle indicating the nominal AC supply voltage that your 228
is built for. If your supply voltage does not agree with this rating, you will have to consult the factory or an
authorized distributor or representative about changing the line voltage of your unit.
WARNING: The line voltage setting is not user convertible.
3.4 INPUT CONNECTORS
The unbalanced input connectors are located on the rear panel. There is one RCA jack per channel.
3.5 OUTPUT CONNECTORS
The balanced output connectors are located on the rear panel. There is one XLR 3-pin male jack per channel.
Pin 2 of the XLR is the impedance balanced driven and is in-phase with the signal at the RCA input jack. Pin 3 is
the undriven impedance balancing pin. Wire pins 2 and 3 to the twisted pair as a standard balanced output.
See Appendix C for proper wiring diagrams that cover a miriad of different situations.
3.1 MOUNTING
The Model 228 occupies a single rack space (45mm or 1-3/4 inches) of a standard EIA equipment rack.
When rack mounting, use appropriate cushioned rack screws. Never restrict air flow through the device’s fan
or vents. When installing the units into a rack, distribute the units evenly. Otherwise, hazardous conditions may
be created by an uneven weight distribution. Connect the unit only to a properly rated supply circuit. Reliable
earthing (grounding) of rack mounted equipment should be maintained. Try not to position the 228 directly
above devices that generate excessive heat such as power amplifiers (unless adequately ventilated) or near
equipment with heavy transformer hum fields.
3.2 REAR PANEL VIEW
T
2345678
UNBALANCED
INPUTS
BALANCED OUTPUTS
8 7 6 5 4 3 2 1
FUSE
1
Page view 6
1 2 3 4 5 6 7 8 9 10 11 12 ... 23 24

Comments to this Manuals

No comments