Aphex USB 500 Rack User Manual download pdf (Page 6)

USB 500 Rack

B. The XLR inputs can be used as +4 line level inputs to the DAW

with no modules installed.

3. Recording the module outputs to the DAW

A. Use four microphone preamp modules to record four micro

phones to four individual tracks in the DAW.

B. Use one microphone preamp module and up to three process-

ing modules in “Chain mode” as a channel strip to record one

microphone to one track in the DAW.

4. Hardware inserts

A. Send four individual tracks or busses from the DAW to the

modules and return the processed signals back to the DAW

for mixing.

B. Send one individual track to be processed with a channel strip

of modules and return the processed signal back to the DAW

for mixing.

C. Send a stereo mix from the DAW through linked compressors

and EQs and return the processed stereo signal to a stereo aux

input in the DAW.

2.0 Front Panel

FOUR SLOTS

The unit features four slots for use with compatible 500 series

modules. Single and dual slot modules can be used. The rear panel

features an XLR input and output for each slot.

POWER BUTTON

When the power button is pushed on, the APHEX logo will light up

conrming that the unit is properly powered.

HEADPHONE AMPS

The USB 500 Rack includes two headphone outputs. Each output has

their own individual amplier with volume control. Both headphone

amps receive one shared, assignable stereo signal from your DAW.

1 2 3 4 5 6 7 8 9 10 11 ... 19 20

No comments

Aphex USB 500 Rack User Manual Page 6